Optical fibre assemblies, made in Pune
Fibre assemblies, built to your drawing.
MTP/MPO, armoured, broadcast and defence assemblies. Built and tested in Pune, quoted in writing for buyers in India and abroad.
- Per-channel test report in the box
- Lot and batch recorded on every order
- Price on request, quoted in writing
Shop by category.
Every product is made to order. Pick a category, then ask for a quote.
Also: Fibre patch cords (LC, SC, FC, ST) · MPO breakout cables · Custom assemblies to drawing · All 30 products
Popular
SC to SC fibre patch cords
SC to SC patch cords made to order for FTTH and PON frames, exchanges and media converters: SC/APC or SC/UPC, simplex or duplex, single-mode or multimode.
Read moreGuideExpanded beam connectors explained
Expanded beam fibre connectors use lenses instead of ferrule contact, so dirt and wear matter less. How they work, where they are used and the loss trade-off.
Read moreGuideMTP vs MPO: what is the difference?
MTP is a branded MPO connector. How the two differ in housing, guide pins, ferrule float and loss grades, whether they intermate, and how to write the order.
Read moreRadix Fibrotech is a fibre optic assembly manufacturer in Pune, India. It builds MTP/MPO trunk cables and patch cords, armoured and tactical fibre cable, SMPTE broadcast cable, mil-aero assemblies and sealed connectors to the buyer's drawing. Every assembly is tested on every channel and ships with its test report. Buyers in India and abroad ask for a written quote online, on WhatsApp or by phone on +91 99702 02526.
MTP/MPO
Up to 144 fibres. One connector.
Trunks, patch cords and breakouts in OM3, OM4, OM5 and OS2, cut to the length of your row, with the polarity your plan calls for.
How an order works.
Four steps from a drawing to a labelled, packed assembly.
Send the requirement
A drawing, a BOM or a few lines: fibre type, count, connectors at each end, lengths and quantity.
Agree the specification
We confirm polarity, breakout lengths, jacket rating and labelling, and send a written quote.
Build and test
Assemblies are terminated in Pune and tested for insertion loss, return loss and continuity on every channel. The test report ships in the box.
Pack and ship
Labelled to your scheme and packed for transport, to sites in India or for export.
Where our assemblies go.
Five industries, each with its own conditions and standards.
Know what to specify.
Plain guides written by people who build the cable.
What is an MPO cable?
An MPO cable carries 8 to 24 or more fibres in one connector. Fibre counts, pin gender, keying, polish and the details to state when ordering MPO assemblies.
Read the guideGuideMTP vs MPO: what is the difference?
MTP is a branded MPO connector. How the two differ in housing, guide pins, ferrule float and loss grades, whether they intermate, and how to write the order.
Read the guideGuideMPO polarity: Type A, B and C explained
MPO polarity Type A, B and C explained: fibre maps, key-up and key-down adapters, the patch cords each TIA-568 method needs, and polarity for parallel optics.
Read the guideGuideOM3 vs OM4 vs OM5: which multimode fibre?
OM3, OM4 and OM5 compared: modal bandwidth, IEEE 802.3 reach for 10G, 40G, 100G and 400G, jacket colours, and when OM5 is worth specifying for a new link.
Read the guideBuying from outside India?
Notes on cable ratings, paperwork and quote details for the market you buy in.
Questions buyers ask
What does Radix Fibrotech make?
Thirty product lines for data centres, broadcast, defence and aerospace, energy and offshore, and industrial and medical systems: MTP/MPO trunks, patch cords and breakouts, armoured and tactical cable, SMPTE hybrid camera cable, SDI and opticalCON cable, MIL, ODC, PCF and POF connectors, and custom harnesses.
Where is Radix Fibrotech?
Radix Fibrotech is at 165, Shukrawar Peth, Laxmidatta Apartments, Shinde Ali, Near Kelkar Museum, Pune 411002, India. Phone and WhatsApp +91 99702 02526, email sales@radixfibrotech.com, Monday to Friday, 09:00 to 18:00 India time (UTC+5:30).
Does Radix Fibrotech supply buyers outside India?
Yes. Radix quotes buyers in the USA, UK, Europe, UAE, Saudi Arabia, Singapore, Australia and other countries, with the Incoterms rule agreed in the written quote. The market pages explain the cable ratings and documents each country expects.
How do I get a price?
Prices are on request because every assembly is built to order. Send the fibre type and count, the connector at each end, the length and the quantity through the quote form, on WhatsApp or by email, and Radix replies with questions or a written quote.
What testing does each assembly get?
Assemblies are tested for insertion loss, return loss and continuity on every channel. The test report ships in the box, and the lot and batch are recorded against the order.
Send us your drawing.
Tell us the fibre type, count, connectors and lengths. An engineer reads every request and replies with questions or a quote.